When cleaning an oil-treated massif wood surface, we recommend using OSMO CLEANER SPRAY, which is intended for the maintenance of waxed and oiled interior wooden surfaces. When renovating and repairing, we recommend using OSMO OIL type 3058 - colourless matt. One layer applied on a clean surface is sufficient. The result of the treatment depends, among other things, on the condition of the wood, so it is necessary to carry out a test application. The damaged surface can be ground with fine sandpaper (not coarser than P150) and re-impregnated with oil suitable for this type of wood. Do not use any chemicals that would degrease and damage the surface. Never place hot or wet objects or objects with a rough surface on the bar counter. All spilt liquids should be promptly cleaned with a dry cloth. The company Sykora s.r.o. does not supply products for the maintenance of these surfaces, you can buy them in specialized stores.
When cleaning, gentle cleaning agents that do not contain abrasives must be used. Soft kitchen cloths are suitable (never use a wire brush). Placing burning cigarettes onto the surface of the worktop leads to its damage. Always use a board when slicing or chopping food. Avoid placing hot kitchen utensils directly from the hob on the work surface. Spilt liquids should be immediately wiped or otherwise removed from the surface and areas of cut-outs and joints of worktops. Do not expose the plastic sealing strip to high temperatures and avoid contact with hot objects (e.g. a pot).
Clean with common cleaning agents other than abrasive pastes and powders. Use a soft cloth or sponge to clean (never use a wire brush). Always use a heat-resistant pad under hot containers and electrical appliances. Use a board when slicing and chopping food. Keep the worktop surface dry. There may be permanent marks on the worktop after contact with aluminium utensils, coffee, wine or other alcohol, which you can remove with concentrated cleaner (after testing in a less visible place). Do not expose to direct fire or place hot objects on it (containers with a temperature of up to approx. 120° C can be placed on the countertop).
For normal daily cleaning, just wipe with a damp cloth and let dry. To remove various dried stains, just use a standard glass cleaner. If a thick layer of dirt forms on the surface, we recommend using the Q-Action cleaner (supplied by the worktop manufacturer). The Dekton and Ceramics worktop material is scratch-resistant and cannot be scratched by ordinary kitchen utensils. Nevertheless, we recommend avoiding strong impacts, especially with hard pointed objects. However, beware of ceramic knives or professional tools with hardened edges, these could leave scratches on the worktop. Dekton Ceramic can withstand the effects of very high temperatures - usually several hundred Celsius degrees. Do not expose the surface to hydrofluoric acid.
Unlike other materials, granite can easily withstand temperatures of up to 250° C. A granite worktop must be impregnated. We recommend impregnating once every 1 or 2 years. Take extra care when handling pots, pans and other metal objects. Spilt liquids (coffee, tea, fruit and vegetable juices, blood, etc.) should be removed immediately. The material can be treated with over-the-counter non-concentrated cleansers, or with lukewarm water and a cloth. To prolong the life of the worktop, use a cutting board when slicing and chopping food.